Home Improvements & Repairs

Get Great Siding.com
Vinyl siding my very well not be for everyone, millions of proud American homeowners have made the decision that it is perfect for that particular individual}. And if the labor cost could be reduced or eliminated, people from everywhere would most definitely follow}. The truth is, you can save on half of the price of vinyl siding if you decide to do it yourself}. Vinyl siding can be purchased at various home shopping centers in your area}. The tool requirements are also modest.

Vinyl can be a wonderful way to avoid painting and covering up those problem or unsightly walls .

Part of the problem with vinyl siding is that it expands and contracts a nice deal with the changes in temperature. The standard 12-foot length may be anywhere from 1/2 to 5/8 inches shorter on a extremely cold day compared to a scorching day. For that one reason alone, vinyl siding has to be cut a little shorter and nailed loosely . If you have installed the vinyl correctly, you should be able to slide the trim 1/2 in. side to side after installation}. The trim pieces are made to accommodate the variations in vinyl length in such a way to not be compromised in appearance.

Materials and tools

What you can expect from getgreatsiding.com, our siding systems include 12-ft. lengths of siding, window/door trim channel, J-channel, utility channel, corner moldings and metal starter strips. In addition, vented and unvented soffits, as well as fascia covers, are available.

The siding must be installed over a flat surface, so unless you’re siding a new home, or have removed the old lap siding, you’ll need to line the wall with sheets of rigid-foam board, usually 1/2 in. thick. While rigid foam offers some insulation, its primary function is to provide a flat nailing surface. Both the rigid foam and siding can be nailed in place with galvanized shingle nails.

Vinyl siding comes in several styles and in a variety of colors. We chose a Dutch lap style, which has the look of tongue-and-groove car siding, because of its distinctive profile.

All vinyl siding and vinyl soffit and fascia can be cut with tin snips, a circular saw with a plywood blade or by scoring it with a knife and breaking it.

Here is a video to see you through! Good Luck!

Share This